In this article, we will tell you about the Reset password for TP link Extender AC750. The default login username and password are both “admin”. If you have changed the login password, there is no way to find it. You have to reset it to factory default and configure it as a new one. Direct press and hold the reset button on the rear panel with a pin for 10 seconds when the device is running.
Note:
1. Firstly, make certain that the router is powered on before
it restarts completely.
2. Furthermore, the default IP address is 192.168.0.1 or http://tplinkwifi.net, and the default login
username and password For Tp-Link both are admin (all lower case).
3. And, ensure that the IP address of your computer is in the same subnet as the device. It implies that your PC has an IP address 192.168.01.
Read more:- https://tplink-repeaternet.blogspot.com/2022/02/tp-link-ac1750-range-extender-setup.html
Factory Default for TP-Link AC750 Wi-Fi Range Extender
Before your reset your Wi-Fi extender to default, you should know about the default login details for this device. In this article, we discuss the default login details for the TP-Link AC750 Wi-Fi Range Extender device.
Reset Linksys Extender to Default
1. Firstly, find that reset button you will find at the back side of your device.
2. Then, press the reset button using a paper pin or any other sharp object.
These steps will delete all settings from your TP-Link AC750
Wi-Fi Range Extender device. Here are the default login user name and password
details that you will use once your device is hard rest.
Hard reset TP-LINK AC750
First point is that to turn the device on and locate the Reset button (hole) on the side. Then press and hold the Reset button for 5 seconds (You can use a paper clip if needed) to reset the router to the factory defaults.
Comments
Post a Comment